To have fun during a drive and to guarantee the safety of the vehicles, it is necessary to keep the tyres at the correct pressure. Overinflated and underinflated tyres have uneven wear patterns, lose control on the road, and yield low fuel consumption. Never risk it and make sure that the tyre pressure is checked with a good tool before the day of the MOT test, and that the readings are compared to the recommended values of the company. Regular inspections increase the effectiveness of brakes and prevent the occurrence of blowouts, especially during bad weather. Another reason why you should have well-inflated tyres is that they last longer, and in the long run, this saves you money. Following these MOT testing requirements, you will be able to ensure that your car meets all the safety requirements and will be prepared to pass a class 4 MOT.
Know the Recommended Pressure
The recommended tyre pressure to use per automobile is stipulated by the automaker and may be located in the car manual or on a sticker in the driver’s door. These figures are carefully calculated in terms of tyre durability, safety, and optimal handling. Adherence to these guidelines will ensure that tyres remain in contact with the road. This simple step will increase your chances of getting through your MOT test with no issues, eliminate lumps, and improve fuel economy. This may compromise the safety and efficiency of your car.
Examine Every Month
Tires also lose air over time, which is usually 1-2 PSI per month, but it may be made worse by variations in temperature. Regular monthly tests with a reliable gauge will help in the timely detection of slow leaks to prevent unexpected failures. Regular checks also let you keep an eye on wear trends, which may point to damper or alignment problems. A monthly tyre check makes your car fuel-efficient, roadworthy, and lowers the chance of an MOT failure brought on by improper pressure.
Calculate When It’s Cold
During the process of driving, the tyres continue to increase in size, which increases the internal air pressure. To be able to check the tyre pressure, make sure that the tyres are cold, and it is better to check the tyres after you have stopped the car for at least two hours to be accurate. Cold reads ensure that safety measures are observed because they represent the actual pressure that will be visible to MOT testers. This extra precaution can help you to avoid misjudging tyre pressure and ensure that your tyres are inflated to optimal performance.
Steer Clear of Low Pressure
One of the greatest security risks and most common causes of MOT failure is under-inflated tyres. Besides adding the need to travel a greater distance to halt and reduce the fuel economy, the insufficiency of pressure may result in blown outputs. Driving on tyres that have been underinflated interferes with performance, especially during wet or rainy seasons. Besides enhancing safety, it is also common to inflate the tyres up to the recommended PSI, which increases their life span, not to mention that it saves on costly repairs. Such a meagre payment on a monthly basis can save a lot of headaches in the long run.
Steer Clear of High Pressure
Over-inflated tyres may also be problematic. The grip and steadiness are decreased when there is excessive air between the tyre and the road. This increases the chances of skidding and lowers the steering accuracy. Also, too much pressure could lead to an explosion in case of potholes and uneven wear, especially in the centre of the tyre. Maintaining the correct pressure helps to ensure that your car is roadworthy and MOT worthy by ensuring the convenience, security, and tyre life.
Check for Damage
Pressure tests are insufficient on their own. Every time you check the pressure, you should check the tyres for cracks, bulges, cuts, or embedded items. MOT failure can be caused by even small apparent damage. The tyre integrity is weakened by sidewall bulges, worn tread, or punctures, which raises the possibility of collisions. Your tyres will be safe, dependable, and long-lasting with regular checks and proper filling.
Examine the Spare Tire
The spare tyre is just as crucial as the ones on the road, but numerous motorists ignore it. Make sure it is undamaged and correctly inflated. Low pressure may cause an alert light to appear or have an impact on MOT findings since the spare is a component of the tyre pressure monitoring device (TPMS) on some cars. A properly serviced spare tyre guarantees that your car satisfies safety regulations and gives you peace of mind in an emergency.
Final Words:
Tire pressure is a little element that has a significant effect on MOT success, as well as security. Maintaining your car’s roadworthiness and lowering the chance of failure requires routine maintenance, appropriate inflation, and damage examination. According to these nine MOT testing guidelines, you can be confident that your tyres will continue to be secure, long-lasting, and compatible.
Also, read: How Professional Transport Services Support Corporate Travel
